These beauties are all brass! They have
unbelievably bright red LED’s which cast a red light on the table even in a
lighted room. They are designed to be exact measurements, not close, not
with an artistic license, but exact! Once you own a pair of these beauties
you won’t settle for anything less on your layout!
TB-FBH-1
Cross Buck Flasher
If you need a flasher for those new cross bucks
you just got from Train Buddy™ Products then this is the ticket. The Flasher
will operate on any power supply from 6v to 30v either AC, DC or DCC. Can
handle up to six pairs of cross bucks for large crossings.
TB-OD-1
Optical Detector
Ok, you have the bucks and the flasher, now you
want them to turn on automatically when the train passes. Like all Train
Buddy™ products we have designed this for the discriminating model
railroader.
TB-IBF-A3
Basic Flasher and Integrated 12v
Regulator
As well as a flasher, this unit can accept most
power, as well as a flasher.
TB-IPD-A1
Integrated Detector & Flasher
Power regulator, detector and flasher this is an
all in one unit and a best value buy.
TB-ITR-A2
Integrated Trolley Reverser
Integrating power regulator and reverser.
TB-CB-1
Cross Bucks without LED's
Same quality all brass cross buck without the
LED's. These can be used on the layout facing away from traffic.
What is truly amazing is that the ones WITH LED's can be used facing away
from the viewing area and STILL make an impact because of the brightness of
the LED's.
TB-PD-1
Photo Detector
In case you need extra photo detectors.
These are somewhat difficult to find.
TB-DS54-T-1
Test Device for Digitrax DS54
This is a simple test unit to plug into your
DS-54 to test the program output before you connect it to the device.
It also has a connection to allow you to read back your CV's while you are
programming the DS-54.
Contact us at 919-562-4378 or e-mail:info@trainbuddy.com
(c)
Copyright 2002-2008, K.A Parker & Associates, Inc. All rights reserved
